Fractal Design Core 2300 Midi-Tower - black

The I / O panel is housed in the front section of the lid and is made of a power button, a USB 3.0 port, one USB 2.0 port and one each Audio In / Out port. The power button has been deposited with a white LED. The front is home to the two drive bays for the external 5.25-inch drives. Alternatively, internal 3.5-inch HDDs can be installed in place of the optical drive. For hard drives, the Core 2300 has a vertically mounted drive bay that can accommodate up to three 2.5-inch SSD or 3.5-inch HDDs. Another 2.5-inch SSD can be installed behind the motherboard tray. Graphics cards can be up to 380 mm long. An ATX power supply can be installed at the bottom of the back and can be up to 205 mm long. The midi tower can accommodate motherboards in ATX format and offers a maximum CPU cooler height of 185 mm. The Core 2300 Midi-Tower has been designed to optimized to a good airflow and is connected with a pre-installed 120 mm fan with 1200 U / min. equipped in the front and the back. At the left part of another 140 mm fan can be installed. At the bottom there is a choice, either to install a 120 mm fan or to build in a 140 mm fan at waiving the lower HDD. The lid is also possible to install a 140 or 120 mm fan. For water cooling the rear can accommodate a 120mm radiator and the front can accommodate a 240-mm dual radiator. An additional radiator may be mounted in the lid when the upper 23 mm of the mainboard components harboring no larger than 34 mm. Behind the Mainboardtray with rubberized openings from 13.5 to 18.5 mm of space for a clean cable management available and the housing has several easy-to-clean dust filter. Technical details:     Dimensions: 233 x 451 x 517 mm (W x H x D)     Material: Steel (Body), Plastic (front cover)     Weight: approx 7.8 kg     Color: Black     Form Factor: ATX     Fan total possible:     2x 120 mm or 1x 140 mm (front)     1x 120 mm (rear)     2x 140/120 mm (cover)     1x 140/120 mm (bottom; partial waiver of HDD and / or fan slots)     1x 140 mm (side)     1x fan controller for 3 fans (rear)     Of this pre-installed:     1x 120 mm (rear; Silent Series, max 1,200 U / min.)     1x 120 mm (front; Silent Series, max 1,200 U / min.)     Radiator-Mountings (partial waiving HDD and / or fan slots):     1x max. 240 mm (front)     1x max. 120 mm (rear)     1x max. 240 mm (cover) (when the upper built-up drive is not longer than 150 mm long, and if the upper 23 mm of the mainboard no module is installed, which is higher than 34 mm)     Filters: front, bottom     Drive Bays:     2x 5.25 inches (external)     3x 3.5 inch max. (internal)     5x 2.5 inches max. (internal)     Power Supply: 1x standard ATX (optional)     Extension slots: 7     I / O Panel:     1x USB 3.0 (internal connection)     1x USB 2.0 (internal connection)     1x per Audio In / Out     1x Power Button (with white LED)     Maximum video card length: 380 mm     Maximum power supply Length: 170 mm (if a floor fan was installed, otherwise a longer PSUs are installed)     Maximum CPU cooler height: 185 mm