FD NODE 804 BLACK-87010
  • FD NODE 804 BLACK-87010
  • FD NODE 804 BLACK-87011
  • FD NODE 804 BLACK-87012
  • FD NODE 804 BLACK-87013
  • FD NODE 804 BLACK-87014
  • FD NODE 804 BLACK-87015
  • FD NODE 804 BLACK-87016
  • FD NODE 804 BLACK-87017
  • FD NODE 804 BLACK-87018
  • FD NODE 804 BLACK-87019
  • FD NODE 804 BLACK-87020
  • FD NODE 804 BLACK-87021
  • FD NODE 804 BLACK-87022
  • FD NODE 804 BLACK-87023
  • FD NODE 804 BLACK-87024
  • FD NODE 804 BLACK-87025

Fractal Design Node 804 Micro-ATX case - black Window

215,09 лв.
С вкл. данък
The node series from the Swedish manufacturer fractal design has the flexibility, both as a HTPC to act file server, media PC and gaming PC and combined with a stylish design, including the black-painted interior with for Fractal Design typical white accents.
FRACTAL DESIGN
FD-CA-NODE-804-BL-W

The front panel with a look of brushed aluminum is a trademark of housing of Node Series and Fractal Design remains this design even when Node 804 faithful. The front is also slightly curved outward and rounded at the edges. The lower part of the front surface consists of a mesh. Only the status LED and a small logo are incorporated in the front. The I / O panel is integrated on the right side of the front and from the front not visible because it is on the outward facing portion of the curved front panel. In the I / O panel with two USB 3.0 ports, a power button, an audio output for headphones and an audio input for microphones are integrated. Is also located nor the slot for a 5.25-inch slimline drive bay About the I / O panel. The right side of the case know no special features, on the contrary to the left side of the node 804, which is equipped with a window. Five white PCI aperture and two holes for ventilation are available as well as cut-outs for the power supply and the I / O panel of the motherboard in the back. On the cover of the micro-ATX Case a large mesh area dominates the design and already suggests generous accommodation for fans. The three pre-installed Silent Series R2 120 mm fan, which can be controlled by a fan controller on the back, are seven more fans expandable to cool the installed hardware sufficient. The internal design of the Node 804 Swedes surprise with a rare case MicroATX enclosures bicameral design. The right side is for the installation of a power supply with a length of up to 260 mm and the accommodation of up to eight 3.5-inch HDDs in two drive cages. The hard drives are here decoupled by rubber buffers. For the ventilation of the chamber in the back preinstalled fans is responsible. If these eight 3.5-inch drives are not enough or chooses to obstruct the right components for a water cooling system, which has two other facilities for hard drives available. So two 2.5-inch SSD or 3.5 inch hard drives can be installed at the bottom of the left ventricle and up to two 2.5-inch SSDs will find behind the front panel a home. There is also a 5.25-inch slimline drive can be installed. The left part of the motherboard is attached to the partition wall of the two chambers. Graphics cards with a length of up to 320 mm can be accommodated as long as the lower fan space remains free in the front. Otherwise, 290 mm remain space for graphics cards. CPU cooler can be up to 160 mm high. For a good Airflow that are installed in the front and rear 120mm fans provide. In addition to the three pre-installed 120 mm fans up to seven more fans can be installed. These are three 120mm fan in the front, so each chamber two fans in total, and four 120- or 140-mm fan under the lid. In addition, the pre-installed 120 mm fans of the right ventricle can be replaced by a 140-mm fan. Up to three of the ten possible fan can be controlled by the fan control 804 of the node. Supporters of watercooling have the opportunity to install on the front pages of the two chambers each have a 240-mm radiator. This can be up to a maximum of 60 mm high and 278 mm long. The cover of the right ventricle, a 280/240-mm radiator to be installed at a height of 130 mm, but this prevents the use of the HDD cages. The left ventricle, in addition to the radiator in the front to receive a 240-mm radiator in the lid, however, which reduces the amount of RAM-bars at 48 mm. According to the manufacturer, the maximum possible combination at the same time is at a 240-mm and a 280 mm radiator and two 120mm radiators. Technical details:     Dimensions: 344 x 307 x 389 mm (W x H x D)     Material: Steel (body), aluminum (front), plastic (front cover)     Weight: 6 kg     Color: Black     Form Factor: Micro-ATX     Fan total possible:     2x 120 mm (left side)     1x 120 mm (right side)     2x 80 mm (rear)     1x integrated fan controller for up to 3 fan     Of this pre-installed:     1x 120 mm (left side; Silent Series, max 1,000 U / min.)     1x 120 mm (right side; Silent Series, max 1,000 U / min.)     Radiator-Mountings (partial waiving HDD and / or fan slots):     2x max. 240 mm (front)     2x max. 280/240 mm (lid)     Filters: front, cover     Drive Bays:     1x 5.25 inch max. (Ext, Slimline, only micro-ATX or smaller)     10x 3.5 inch max. (internal)     4x 2.5 inch max. (internal)     Power Supply: 1x standard ATX (optional)     Extension slots: 5     I / O Panel:     2x USB 3.0 (internal connection)     1x per Audio In / Out     1x Power Button     Maximum video card length: 320 mm (290 mm when installed in the left chamber of the lower fan in the front)     Maximum power supply Length: 260 mm     Maximum CPU cooler height: 160 mm

Техническо описание

Warranty
24 Months
Цвят
Black
Модел
Node 804
Форм фактор
Micro-ATX and Mini-ITX
Dimensions
344 x 307 x 389 mm
Weight
6 kg
Other
CPU coolers up to 160 mm in height, PSU compatibility: ATX PSUs up to 260 mm deep, Graphics card compatibility: Graphics cards up to 320mm in length. Graphics cards up to 290 mm in length may be installed if a fan is installed in the lower position in the
Manufacturer
Fractal Design
Materials
-
Mnfr Part #
FD-CA-NODE-804-BL-W
Cooling
Cooling system: Front: 4 – 120mm fans (included is one hydraulic bearing 120mm Silent Series R2 fan, 1000 RPM speed), Rear: 1 - 120/140mm fan (included is a hydraulic bearing 120mm Silent Series R2 fan, 1000 RPM speed), Rear: 1 - 120mm fan slots (included
I/O
2 - USB 3.0 Audio in/out Power button with LED (blue) HDD activity LED (white)
Slots for devices
8 - 3.5″ , HDD positions 2 - 2.5″ , dedicated SSD unit positions 2 - Extra positions for either 3,5″ or 2,5″ drives
Expansion Slots
5

Конкретни референции

Мнения

Няма потребителски мнения до този момент.

Напишете Вашето мнение

Fractal Design Node 804 Micro-ATX case - black Window

The node series from the Swedish manufacturer fractal design has the flexibility, both as a HTPC to act file server, media PC and gaming PC and combined with a stylish design, including the black-painted interior with for Fractal Design typical white accents.

Напишете Вашето мнение